Back To Index << Back To Templates

# Template UV Subordinate Substance Administration

Aus Publikation für Projekt AKTIN | Release 2026.1.2 vom 2026‑04‑27 18:50:33 | | | HTML erstellt am 2026‑04‑27 19:00:10

Id | 2.16.840.1.113883.10.21.4.6 | Gültigkeit ab | 2023‑01‑30 09:36:00
Status | Entwurf | Versions-Label | 2023
Name | UVSubordinateadministration | Bezeichnung | UV Subordinate Substance Administration
Beschreibung | Universal Subordinate Substance Administration to convey information about dosages
Kontext | Elternknoten des Template-Element mit Id 2.16.840.1.113883.10.21.4.6
Klassifikation | CDA Entry Level Template
Offen/Geschlossen | Offen (auch andere als die definierten Elemente sind erlaubt)
Benutzt von / Benutzt |
Benutzt von 0 Transactions und 3 Templates, Benutzt 0 Templates
Benutzt von | als | Name | Version
--- | --- | --- | ---
1.2.276.0.76.3.1.195.10.67 | Containment | Medikation (2023) | 2023‑12‑03
1.2.276.0.76.3.1.195.10.64 |  | Medikamentöse Therapie | 2024‑08‑14 18:02:56
1.2.276.0.76.3.1.195.10.93 |  | Notaufnahmeregister Transitionsversion (v4transit) | 2026‑03‑25 11:04:07
Beziehung | Version: Template 2.16.840.1.113883.10.21.4.6 UV Subordinate Substance Administration (2017‑04‑30) ref pharmcda- Spezialisierung: Template 2.16.840.1.113883.10.12.308 CDA SubstanceAdministration (2005‑09‑07) ref ad1bbr-
Beispiel |
Beispiel
<substanceAdministration classCode="SBADM" moodCode="EVN"> <templateId root="2.16.840.1.113883.10.21.4.6"/> <statusCode code="active"/> <effectiveTime xsi:type="PIVL_TS" institutionSpecified="true"> <period value="12" unit="h"/> </effectiveTime> <doseQuantity xsi:type="IVL_PQ" value="2" unit="{puff}"/> <consumable> <manufacturedProduct> <manufacturedMaterial nullFlavor="NA"/> </manufacturedProduct> </consumable></substanceAdministration>
Item | DT | Kard | Konf | Beschreibung | Label
--- | --- | --- | --- | --- | ---
hl7:substanceAdministration |  | 1 … 1 | R |  |
@classCode | cs | 1 … 1 | F | SBADM
@moodCode | cs | 1 … 1 | R | If the subordinate substance administration refers to Medication Order then a substance administration request (moodCode is 'RQO') is used. If it refers to a Medication Statement, the moodCode shall be set to event/intent (moodCode is 'EVN' or 'INT').
| CONF |
Der Wert von @moodCode MUSS gewählt werden aus dem Value Set 2.16.840.1.113883.11.21.4 Mood Code Evn Int Rqo (DYNAMIC)
| Constraint | The moodCode of this subordinate substance administration SHALL be the same of the parent substance administration
hl7:templateId | II | 1 … 1 | M |  |
@root | uid | 1 … 1 | F | 2.16.840.1.113883.10.21.4.6
hl7:statusCode | CS | 1 … 1 | M |  |
| Constraint | The statusCode of this subordinate substance administration SHALL be the same of that of the parent substance administration.
| CONF |
Der Wert von @code MUSS gewählt werden aus dem Value Set 2.16.840.1.113883.11.21.2 ActStatusActiveCompletedAbortedSuspended (DYNAMIC)
Auswahl | 1 … 1 |  | Elemente in der Auswahl: hl7:effectiveTime[@value or @nullFlavor] hl7:effectiveTime[@xsi:type='PIVL_TS'] hl7:effectiveTime[@xsi:type='EIVL_TS'] hl7:effectiveTime[@xsi:type='SXPR_TS']
hl7:effectiveTime | TS | 0 … 1 | C | This required element describes the frequency of intakes. If not known it shall be valued with the nullflavor "UNK" |
wo [@value or @nullFlavor] |
| Beispiel | Once (known date) <effectiveTime value="20170404"/>
| Beispiel | Unknown <effectiveTime nullFlavor="UNK"/>
hl7:effectiveTime | PIVL_TS | 0 … 1 | C | Periodic Time Interval |
wo [@xsi:type='PIVL_TS'] |
| Beispiel | Every 4 hours <effectiveTime xsi:type="PIVL_TS" institutionSpecified="false"> <period value="4" unit="h"/></effectiveTime>
| Beispiel | Twice a day <effectiveTime xsi:type="PIVL_TS" institutionSpecified="true"> <period value="12" unit="h"/></effectiveTime>
hl7:effectiveTime | EIVL_TS | 0 … 1 | C | Event Related Time Interval |
wo [@xsi:type='EIVL_TS'] |
| Beispiel | After meal <effectiveTime xsi:type="EIVL_TS"> <event code="PC" codeSystem="2.16.840.1.113883.5.139"/></effectiveTime>
| Beispiel | One hour before breakfast <effectiveTime xsi:type="EIVL_TS"> <event code="ACM" codeSystem="2.16.840.1.113883.5.139"/> <offset> <low value="1" unit="h"/> </offset></effectiveTime>
hl7:event | EIVL.event | 0 … 1 | C |  |
@code | cs | 0 … 1 |  |
| CONF |
Der Wert von @code MUSS gewählt werden aus dem Value Set 2.16.840.1.113883.1.11.10706 TimingEvent (DYNAMIC)
hl7:effectiveTime | SXPR_TS | 0 … 1 | R | Combined Time Interval |
wo [@xsi:type='SXPR_TS'] |
hl7:doseQuantity | IVL_PQ | 0 … 1 | R | The doseQuantity describes the amount of the medication given (the dosage). If a dose range is given (e.g., 1-2 tablets, or 325-750mg), then the <low> and <high> bounds are specified in their respective elements; otherwise only one physical quantity is specified (e.g. 2 drops) The dose can be in some known and measurable unit, such as grams, milligrams,or described in "administration" units (unit of presentation, such as capsules). If the dose is in countable items (tablets, caplets, "eaches"), then the unit could be omitted or valorized using the UCUM annotations for describing the type of countable items (e.g. .{tablet}, {puff},..). The unit attribute – when expresses unit of measures- shall be derived from the UCUM code system. The used elements should contain a <translation> element that provides a reference to the originalText found in the narrative body of the document. |
@unit | cs | 0 … 1 |  |
| Beispiel | Not pre-coordinated consumable <doseQuantity value="25" unit="mg"/>
| Beispiel | Pre-coordinated consumable - Dose Range <doseQuantity> <low value="1" unit="{tablet}"/> <high value="2" unit="{tablet}"/></doseQuantity>
| Beispiel | Pre-coordinated consumable <doseQuantity value="2" unit="{puff}"/>
| Beispiel | Pre-coordinated consumable with text reference <doseQuantity value="2" unit="{puff}"> <translation nullFlavor="NI"> <originalText> <reference value="#text-ref-1"/> </originalText> </translation></doseQuantity>
| Beispiel | Textual dosage <doseQuantity nullFlavor="NI"> <translation nullFlavor="NI"> <originalText> <reference value="#text-ref-1"/> </originalText> </translation></doseQuantity>
hl7:rateQuantity | IVL_PQ | 0 … 1 |  |  |
hl7:maxDoseQuantity | RTO_PQ_PQ | 0 … 1 |  |  |
hl7:administrationUnitCode | CE | 0 … 1 |  |  |
| CONF |
Der Wert von @code MUSS gewählt werden aus dem Value Set 2.16.840.1.113883.1.11.14570 AdministrableDrugForm (DYNAMIC)
hl7:consumable |  | 1 … 1 | R |  |
hl7:manufacturedProduct |  | 1 … 1 | R |  |
hl7:manufacturedMaterial |  | 1 … 1 | R |  |
@nullFlavor | cs | 1 … 1 | F | NA